3 Series E93 325d (M57T2) CONVER
51 16 340
Removing and installing/replacing lock for
right glovebox
Release screws (1).
Remove lower section of lock (3).
Raise upper section of lock (2), disconnection associated plug
connection and remove.
Installation:
Make sure plug connection (1) is correctly mounted.
Cables must not be jammed.
Note:
Lower section of lock is destroyed when lock cylinder is removed.
When replacing lock cylinder, always install cylinder in new lower
section of lock.
Removing lock cylinder or replacing lower section of lock:
Insert vehicle key (1) in lock cylinder.
Release eccentric cap (2) with screwdriver from lock (3).
RA Removing and installing/replacing lock for right glovebox
BMW AG - TIS
26.01.2013 01:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
