bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

14 RA In-line Plugs, 30-pin, Hybrid System MQS_MPQ|Page 1073 > < 13 RA Cutting To Length And Stripping Insulation From Cables
Page 1
background image

61 13 ...

In-line plugs, 30-pin, Hybrid System
MQS/MPQ

Manufactured by AMP: The following contact types without strand
sealing can be fitted in the plug housings:

MQS (Micro Quadlock System)

MPQ, width 2.8 mm (Micro Power Quadlock)

MPQ, width 5.2 mm (Micro Power Quadlock)

Socket housing:

Raise lock (1) on housing (2).

Push contact carrier (3) from rear out of housing (2).

Note:

Pushing out the contact carrier releases the secondary locks of
the socket contacts.

Hold down retaining hook (1) of socket contact in opening of
contact carrier with a small screwdriver.

Pull wire with socket contact in direction of arrow as far as
secondary lock (2).

Hold down retaining hook in secondary lock (1) again and pull
cable with socket contact (2) completely out of contact carrier (3).

RA  In-line plugs, 30-pin, Hybrid System MQS/MPQ

BMW AG - TIS

24.01.2013  12:00

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

14 RA In-line Plugs, 30-pin, Hybrid System MQS_MPQ|Page 1073 > < 13 RA Cutting To Length And Stripping Insulation From Cables