5 Series E39 520d (M47) SAL
Remove transmission.
Remove exhaust system.
Drain off and top up coolant.
Installation:
Vent cooling system and check for leaks.
Remove air cleaner element.
Remove intake air manifold.
Remove fan cowl.
Move engine hood to assembly position:
Note:
The following work must be carried out with a second person
assisting. Work instruction applies to left and right sides.
Hold engine hood.
Raise retaining clip (1) slightly and slide upwards.
Unhook damper (2) on engine hood.
Raise engine hood.
Insert M8 screw (1) into engine hood hinges (2) for fastening.
Release screws (1).
Detach molded hose in direction of arrow.
RA Removing and installing engine (M47)
BMW AG - TIS
22.01.2013 22:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -