5 Series E39 520d (M47) TOUR
13 51 040
Checking injection pump measured value
(M47)
Coolant temperature > 20
°
C.
Connect DIS or MoDiC to diagnosis socket.
Select diagnostic program of DDE control unit.
Read fault memory of DDE control unit. Switch off ignition.
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Follow instructions for disconnecting and connecting battery,
refer to General Information MG 12.
Disconnect and cover battery negative lead.
Remove intake air manifold,
refer to 11 61 050.
Remove splash guard.
Remove radiator blind,
refer to 17 11 020.
Read off setting value in area (1) on injection pump.
Note:
The setting value is stamped on the nameplate (e.g. 0.86). If
necessary, detach fuel line to obtain reading.
RA Checking injection pump measured value (M47)
BMW AG - TIS
23.01.2013 23:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
