5 Series E39 523i (M52TU) TOUR
51 12 435
Replacing body molding for rear bumper on
left or right side (touring)
Remove center body molding from rear bumper,
refer to 51 12 432
Version without Park Distance Control (PDC):
First unclip body molding at rear (1), then at side (2) and lift
obliquely backwards to remove.
Installation:
First guide in body molding at front (3), then clip in.
Version with Park Distance Control (PDC):
First unclip body molding at rear (1), then at side (2).
Lift out bottom/top detent (3) and pull off ultrasonic converter (4).
Remove body molding at an angle toward rear.
Only replace:
Lift chrome strip (1) out of clips (2) and pull off body molding (3).
RA Replacing body molding for rear bumper on left or right side (touring)
BMW AG - TIS
16.02.2013 12:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -