5 Series E39 528i (M52) SAL
Do not apply grease to brake pad backplate.
Check dust sleeve (1) for damage and replace if necessary.
Clean contact face (2) of brake piston and apply a thin coating of
anti-squeak compound.
Anti-squeak compound,
refer to BMW Service Operating Fluids
Important!
Dust sleeve must not come into contact with anti-squeak
compound as this may cause the dust sleeve to swell.
Important!
In E39/Touring models, make sure the insulating ring (1) is
installed on the brake piston.
Clean mounting faces (1) and (2) of brake lining hammer
heads/brake caliper housing and coat with anti-squeak compound.
Anti-squeak compound,
refer to BMW Service Operating Fluids
Clean contact face (3) of brake caliper and apply a thin coating of
anti-squeak compound.
Anti-squeak compound,
refer to BMW Service Operating Fluids
RA Removing and installing or replacing brake linings on both rear disk brakes
BMW AG - TIS
21.02.2013 21:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -