5 Series E39 528i (M52TU) TOUR
Note:
Grasp the bellows by hand only at the first fold (1) (risk of
damage).
Detach bellows starting from center (A) towards front and rear (B)
from glass slide/tilt sunroof lid (2).
Release screws (1) and (2) with special tool 00 2 130 .
Installation:
Replace removed screws (microencapsulation) or install old
screws with Loctite 270 (Sourcing Reference: BMW Parts
Service).
Tighten down screws with special tool 00 9 250 .
Tightening torque 54 12 2AZ.
Raise glass slide/tilt sunroof lid (1) at rear until setting lever (2)
can be levered out of retaining pin (3) of lid (1).
Note:
Place glass sunroof lid on a clean base/support.
Setting lever with retaining screw:
Release retaining screw (1) until assembly opening is free.
Raise setting lever (2) and unhook from slide (3).
RA Removing and installing glass sliding/tilting sunroof lid
BMW AG - TIS
20.02.2013 23:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -