5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Checking position of exhaust and inlet camshafts:
If necessary, rotate exhaust camshaft at hexagon head until
exhaust cam on cylinder 5 is facing upwards.
If necessary, rotate inlet camshaft at hexagon head until inlet cam
on cylinder 7 is facing upwards.
Note:
Coat all sliding surfaces on VANOS gear with engine oil as
antiseize agent.
Cylinder bank 5 to 8:
Install toothed sleeves (2) in exhaust and inlet camshafts.
Align openings in toothed sleeves (2) to tapped holes in
camshafts.
Cylinder bank 5 to 8:
Note:
The position of the tapped hole on the sprocket wheels is
important for bolt accessibility. It has not influence on the function.
Place chain (1) on sprocket wheels (2) so that tapped holes on
sprocket wheels are situated vertically.
RA Removing and installing/replacing left VANOS gear (S62)
BMW AG - TIS
21.02.2013 15:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -