bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing_replacing Left VANOS Gear (S62)|Page 1014 > < 3 RA Removing And Installing_replacing Left VANOS Gear (S62)|Page 1012
Page 1
background image

 11 36 050

Removing and installing/replacing left VANOS
gear (S62)

Special tools required:

11 2 300

11 7 120

11 7 130

11 7 140

11 7 150

11 7 200

12 6 050

12 6 410

12 6 411

(cylinder bank 5 to 8)

Read fault memory and make a documentary record.

Open drain plug on radiator. Open drain plug for coolant on right
side of engine block. Drain and dispose of coolant.

Installation:

Replace sealing ring for drain plug on engine block.

Tightening torque, refer to 11 11 5AZ .

Top up coolant. Vent cooling system and check for leaks.

Remove intake filter housing upper section with air-mass flow
sensor.

Remove intake air manifold.

Remove both cylinder head covers.

Remove all spark plugs.

Remove water hose between radiator and thermostat housing.

Remove fan clutch with fan impeller and fan cowl.

RA  Removing and installing/replacing left VANOS gear (S62)

BMW AG - TIS

21.02.2013  15:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing_replacing Left VANOS Gear (S62)|Page 1014 > < 3 RA Removing And Installing_replacing Left VANOS Gear (S62)|Page 1012