5 Series E39 M5 (S62) SAL
Cylinder bank 5 to 8:
Fit special tool 11 7 130 to VANOS adjustment unit.
Connect compressed air (2 to 8 bar).
Cylinder bank 5 to 8:
Disconnect plug connection for solenoid valves on cylinder
bank 5 to 8.
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 (from special tool kit 12 6 410 ) to solenoid valves
on cylinder bank 5 to 8. Connect special tool
12 6 411 to
correct terminals on car battery.
Alternately press toggle switch buttons 4 and 3 several times on
special tool 12 6 050 .
Cylinder bank 5 to 8:
Press and hold down toggle switch button 4 on special tool
12 6 050 .
Simultaneously rotate inlet camshaft at hexagon against direction
of rotation up to stop.
Note:
The splines in the VANOS gear are now in contact; the inlet
camshaft cannot be rotated further.
Cylinder bank 5 to 8:
Alternately press toggle switch buttons 2 and 1 several times on
special tool 12 6 050 .
RA Removing and installing/replacing toothed shafts of VANOS gear on left and right
BMW AG - TIS
21.02.2013 19:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
