5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4:
Caution!
CCW thread!
Brace against twin surface (1) and release hex head (2).
Release toothed shaft screw connection on inlet and exhaust
sides.
Cylinder bank 5 to 8:
Connect special tool 12 6 050 in conjunction with special tool
12 6 411 to solenoid valves of VANOS adjustment unit. Connect
special tool 12 6 411 to correct terminals on car battery.
Press button 1 on special tool 12 6 050 and simultaneously
pull out toothed shaft of exhaust side by hand up to stop.
Press button 3 on special tool 12 6 050 and simultaneously
pull out toothed shaft of inlet side by hand up to stop.
Cylinder bank 5 to 8:
Caution!
CCW thread!
Brace against twin surface (1) and release hex head (2).
Release toothed shaft screw connection on inlet and exhaust
sides.
Installation:
Installation of the toothed shafts and the VANOS adjustment unit
is described separately from removal. The assembly sequence for
installation and removal is different.
RA Removing and installing/replacing toothed shafts of VANOS gear on left and right
BMW AG - TIS
21.02.2013 19:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 10 -