5 Series E39 M5 (S62) SAL
Cylinder bank 1 to 4:
Remove special tool 11 7 120 .
Cylinder bank 5 to 8:
Remove special tool 11 7 120 .
Remove special tool 11 2 300 . Crank engine at central bolt in
direction of rotation a further revolution up to overlap TDC
position.
Cylinder bank 5 to 8:
Note:
To tighten down screws on VANOS gear: Use special tool
11 7 200 .
Tighten down remaining six bolts on VANOS gear to 10 Nm.
RA Removing and installing/replacing toothed shafts of VANOS gear on left and right
BMW AG - TIS
21.02.2013 19:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 19 -
