5 Series E60 520d (N47) SAL
Prepare special tool (1) 24 4 161 (A) with shaped section (2)
24 4 165 side (A) to (A).
Insert special tool 24 4 160 into opening of transmission housing
and clamp gently with screw (1).
Twist in screw (2) and clamp down.
Then tighten down screw (1).
Note:
Illustration similar.
Release bolts and remove transmission.
Tightening torque, 24 00 1AZ
.
Note:
Illustration similar.
Installation:
Bore in driving disc must be accessible from opening on engine
oil sump.
Check dowel sleeves (1 and 2) for correct seating.
Replace damaged dowel sleeves.
RA Removing and installing automatic transmission (6HP19Z) N47
BMW AG - TIS
23.01.2013 18:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -