5 Series E60 525i (N52K) SAL
Mark severance cut (1) in accordance with measurement and
cut.
Measurement a = approx. 30 mm.
Measurement b = approx. 50 mm
Important!
Distance to outer edge (3) is 3 mm in area (2).
The trim must have a radius of approx. 4 mm in area (2).
Otherwise there is a risk that the metal plate of the rear side
panel will begin breaking!
View of trimmed rear side panel.
1 = Body outer side
2 = Radius of trimmed side panel
Installation:
Apply adhesive (1) to inside of side panel (2) at distance a.
Dimension a = 10 mm
Installation:
Apply adhesive in area (1).
Measurement a = 140 mm from edge of cover for longitudinal
member.
Flange edge of side panel in area (1) flush to outer wheel arch
section.
RA Replacing rear left side panel (partial replacement, longitudinal member cover b
BMW AG - TIS
17.02.2013 18:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
