5 Series E60 535d (M57TU) SAL
Release banjo bolt (2).
Tightening torque: 11 42 4AZ
.
Remove oil pressure line.
Installation:
Replace all seals.
Tighten down oil line parallel to H.P. turbocharger (3).
Release screws (1).
Assemble engine.
Important!
To avoid damaging the threads and prevent turbocharger
leakage, insert retaining screws in 1/2 turns simultaneously.
RA Removing and installing or replacing high-pressure exhaust turbocharger (small t
BMW AG - TIS
22.02.2013 01:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
