5 Series E60 545i (N62) SAL
18 40 010
Removing and installing/replacing left
exhaust manifold (N62, N62TU)
Warning!
Scalding hazard!
Only perform these tasks on an engine that has cooled down.
Necessary preliminary tasks:
•
Remove left control sensor
•
Remove left monitor sensor
•
Remove complete exhaust system
•
Secure engine in installation position with special tool
•
Lower front axle support
•
Release lower universal joint of steering spindle
For purposes of clarity, nuts are shown on removed engine.
Release nuts on exhaust manifold from below.
Remove exhaust manifold towards bottom and pull out towards
rear.
Installation:
Replace seals.
Seal beads faces the exhaust manifold.
Coat threads with copper paste.
Replace nuts.
Tightening torque 11621AZ.
RA Removing and installing/replacing left exhaust manifold (N62, N62TU)
BMW AG - TIS
22.02.2013 14:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -