5 Series E60 M5 (S85) SAL
Note:
Clutch plate (1) must be able to move in clutch.
Centre clutch plate (2) with special tool
21 2 280 on flywheel.
Important!
Install clutch plate in correct position.
Note designation for "engine side" / "transmission side".
Handle clutch plate with care. Do not touch surfaces of friction
linings.
Fit clutch (1) to flywheel.
Tightening torque 21 21 1AZ
.
Note:
Clutch (1) must be secured by way of dowel pins (2).
Release spindle (1) until load is fully removed from diaphragm
spring (2) Remove special tools 21 2 170 and 21 2 180 .
RA Removing and installing/replacing clutch (GS6-53BZ) (S85 USA only)
BMW AG - TIS
22.02.2013 18:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -