5 Series E61 520d (M47T2) TOUR
12 31 020
Removing and installing/replacing alternator
(M47T2)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit.
•
Switch off ignition
•
Disconnect battery negative lead
•
Remove alternator drive belt
•
Unlock pressure pipe at top left and twist to one side
Unfasten nut.
Tightening torque 12 31 1AZ
.
Remove battery positive leads (1 and 2).
Unlock plug (3) and remove.
Release screw and remove idler pulley (1).
Release screws and remove alternator (2).
Tightening torque 12 31 2AZ
.
Note:
Check stored fault messages.
Now clear the fault memory.
RA Removing and installing/replacing alternator (M47T2)
BMW AG - TIS
25.01.2013 19:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -