5 Series E61 520d (M47T2) TOUR
51 43 292
Removing and installing/replacing comfort
operating unit
Necessary preliminary tasks:
•
Remove luggage compartment floor trim panel (with storage
pack, rear only)
•
Remove both panels for roof pillar (D-pillar)
•
Remove trim from rear apron
•
Remove storage tray in luggage compartment on left
Release screws (1) and remove holder (2).
Unscrew nuts (3).
Release clip (1) and cable tie (2) on left and right.
Right side only:
Disconnect plug connection (3).
Installation:
Align guide rail (4) to holder and secure with clip (1) and cable
tie (2).
Open holders (1) and feed out guide tubes (2).
RA Removing and installing/replacing comfort operating unit
BMW AG - TIS
26.01.2013 04:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -