6 Series 645Ci (N62) Coupe
Release A/C compressor (1).
Note:
Secure all connecting leads with cable ties (3) against falling
down.
Release and disconnect coolant hoses (1).
Unlock heater hose (2) and detach in direction of arrow.
Installation:
Plug-in connections of coolant hoses are correctly fitted when they
snap into place with a clearly audible click.
Unlock coolant hose (1) on auxiliary water pump and detach in
direction of arrow.
Remove auxiliary water pump.
Unlock hose (1) and detach from secondary air pump.
Secure automatic transmission heat exchanger (2) with cable tie
(3) against falling down.
Note:
Engine removed for purposes of clarity.
RA Removing and installing engine (N62)
BMW AG - TIS
18.01.2013 05:32
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -