6 Series 645Ci (N62) Coupe
Release screws (1) and feed out refrigerant lines (2).
Tightening torque 64 53 6AZ
.
Release screw (1) and disconnect coolant line connection.
Installation:
Replace all sealing rings and moisten with refrigerant oil.
Tightening torque 64 53 6AZ
.
Release bolt (1) and remove bracket for oil lines (2).
Tightening torque 32 41 17AZ
.
Important!
Secure compressor (1) against falling out.
Disconnect plug connection (2).
Release screw and nut (3).
Release bolts (4) and feed out compressor (1) downwards with
refrigerant lines.
Tightening torque 64 52 3AZ
.
RA Replacing A/C system compressor (N62)
BMW AG - TIS
18.01.2013 11:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
