6 Series E64 635d (M57T2) CONVER
Parallelism (B) (window tilt):
Ideal adjustment:
Door window top edge (1) must be parallel to contour of seal (2).
Close door window glass and mark along seal (2) at bottom and
top with a water-soluble marker pen.
Note:
Clean side window.
Slacken screws (1) with Torx T30 (do not release fully).
Adjust door window (3) by turning (B). Tighten down screws (1).
Installation:
Tightening torque:
1
51 37 2AZ
Longitudinal adjustment (C):
Ideal adjustment:
Distance (a) of door window glass (1) to strip (2) of door
window:
Dimension (a) = 10 mm
Slacken screws (1) with Torx T30 (do not release fully).
Slacken nut (2) with special tool 41 6 120 (do not release fully).
Adjust door window (3) by turning (C). Release screws (1) and
nut (2).
Installation:
Tightening torque:
1
51 37 2AZ
2
51 37 7AZ
RA Adjusting rear left or right side windows
BMW AG - TIS
03.02.2013 03:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
