7 Series E38 740iL (M62) SAL
11 12 719
Milling down cylinder head gasketing face
(M62)
(Cylinder head dismantled)
Check planeness of cylinder head gasketing face with
straightedge (standard).
Deviation from planeness max. 0.05 mm.
Note:
Machine limit,
refer to Technical Data
Caution!
To compensate for compression, there is a repair cylinder
head gasket.
Note:
The repair cylinder head gasket is designated at the back with
a bore beside the 4th or 8th cylinder.
RA Milling down cylinder head gasketing face (M62)
BMW AG - TIS
17.02.2013 15:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
