7 Series E38 740iL (M62) SAL
Check sealing ring in angle section, replace if necessary.
Press oil separator into angle section.
Tighten guide rail and retaining screw for oil separator.
Replace grub screw.
Insert grub screw only until it makes contact with angle section (1)
without play; do not tighten down.
Note:
Grub screw secures the angle bracket (1) in the cylinder head.
Align camshafts with open-end wrench.
Caution!
Do not damage the cylinder head.
Fit special tool 11 2 445 / 441 to camshafts on cylinder
bank 1-4.
RA Removing and installing left cylinder head (M62 up to 9/98)
BMW AG - TIS
17.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -