7 Series E38 740iL (M62) SAL
Fit special tool 11 2 443 to special tool 11 2 445 / 441 and
secure with special tool 11 2 444 using the spark plug thread.
Fit special tool 11 2 443 to special tool 11 2 446 / 442 and
secure with special tool 11 2 444 using the spark plug thread.
Crank engine from the 45
°
before TDC position in direction of
rotation up to TDC position.
Secure crankshaft in TDC position with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 before starting engine.
Fit sprocket with chain to intake camshaft on cylinder bank 5-8
with long bores aligned centrally.
Fit screws with no clearance.
RA Removing and installing left cylinder head (M62 up to 9/98)
BMW AG - TIS
17.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -