7 Series E38 740iL (M62) SAL
Caution!
Do not damage the cylinder head.
Align camshafts with an open-end wrench so that special
tools 11 2 441 / 445 rest without a gap on the cylinder head.
Fit special tool 11 2 443 to special tool 11 2 445 / 441 and
secure with special tool 11 2 444 using the spark plug thread.
E38/E39
Lift timing chain and hold under tension.
Crank engine from 45
°
before TDC position in direction of rotation
up to TDC position.
Hold crankshaft in TDC position with special tool 11 2 300.
Caution!
Remove special tool 11 2 300 before starting engine.
E53 (X5)
Lift timing chain and hold under tension.
Crank engine from 45
°
before TDC position in direction of rotation
up to TDC position.
Secure crankshaft with special tool 11 5 180 in TDC position.
Caution!
Remove special tool 11 5 180 before starting engine.
RA Removing and installing right cylinder head (M62 VANOS from 9/98)
BMW AG - TIS
17.02.2013 15:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
