7 Series E38 740iL (M62) SAL
Note:
When unfastening screw connection on camshaft, brace
camshaft on hex head.
Caution!
Do not damage the cylinder head.
If necessary, machine open-end wrench accordingly.
Unfasten remaining three screws on exhaust and inlet camshafts
on cylinder bank 5 to 8 approx. 1/2 a turn.
Remove piston for chain tensioner,
refer to 11 14 090.
Remove timing case cover, top right,
refer to 11 14 085.
Remove sprocket on right inlet camshaft (cylinder bank 1 to 4).
Secure chain to prevent it from dropping.
RA Removing and installing right cylinder head (M62 up to 9/98)
BMW AG - TIS
17.02.2013 15:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
