7 Series E38 750iL (M73) SAL
34 51 525
Removing and installing/replacing hydraulic
unit ABS/ASC+T, DSC3 from 09/98
Note:
Note "General Information",
34 00 ...
Before removing the hydraulic unit, read out the fault memory
of the control unit and if necessary print the fault code.
After finishing work:
Check function of hydraulic control unit -
(refer to DIS, Diagnosis and Information System).
Installation:
Bleed brake system,
ABS/ASC+T, refer to 34 00 048
DSC3, refer to 34 00 050
Draw brake fluid out of expansion tank with a suction bottle
reserved for exclusive use with brake fluid.
Unlock fastener of plug connection (1) in direction (2). Vertically
disconnect plug connection (1) in direction (3) upwards.
Installation:
Position plug connection (1) vertically on control module in
order to avoid damaging pins.
RA Removing and installing/replacing hydraulic unit ABS/ASC+T, DSC3 from 09/98
BMW AG - TIS
20.02.2013 22:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -