7 Series E38 L7 (M73) SAL
Remove idler arm
Installation:
Replace self-locking nut.
Tightening Torque,
refer to Technical Data 32 21 7AZ.
Remove left or right reinforcement and heat shield.
Remove positive lead on support point.
If applicable, unfasten oil line from front axle support.
Remove traction strut.
Installation:
Fit washer (1) and replace self-locking nut.
Tightening Torque,
refer to Technical Data 31 12 13AZ.
Remove stabilizer from push rod.
Unfasten nut.
Press off left and right track rods with special tool 32 1 190 from
steering knuckle and pitman arm.
Installation:
Replace self-locking nut.
Tightening Torque,
refer to Technical Data 32 21 3AZ.
RA Replacing front-axle carrier
BMW AG - TIS
22.02.2013 01:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -