7 Series E65 745d (M67TU) SAL
All main bearing caps (1) are bolted to the inner bearing seat.
Installation:
Bar crankshaft (2) once.
Screw in bolt (2) on cross-bracket (1) in direction of arrow.
Position all cross-brackets on crankcase.
Join all bolts from (1 to 18) to 10 Nm.
Release all bolts from (1 to 18) through 90
°
again.
Secure all bolts (1) on outer bearing seat.
Tightening torque: 11 11 1AZ
.
RA Replacing crankshaft (M67TU)
BMW AG - TIS
12.02.2013 13:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -