7 Series E65 745d (M67TU) SAL
Important!
In event of turbocharger damage:
•
Pressure pipes
•
Intercooler
•
Throttle valves
•
Intake air manifold
•
Swirl flaps in intake air manifold
must be checked for foreign bodies, damage and operation.
Turbocharger must be removed together with oil pressure line.
Oil pressure line must not be damaged or deformed in any way
when removed.
Unclip hoses (1).
Unclip line and cable (2).
Release screw.
Detach hose and remove intake pipe (3).
Release screw.
Unlock clamp (1) in direction of arrow.
Remove pressure pipe (2).
Release screws (1).
Unfasten clip.
Remove oil return line (2).
Release banjo bolt (3).
Installation:
Replace sealing rings.
Tightening torque 11 65 2AZ
.
Secure turbocharger (6) against falling out.
Release screw (5).
Unlock plug (7) and remove.
RA Removing and installing or replacing left exhaust turbocharger (M67TU)
BMW AG - TIS
12.02.2013 13:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
