7 Series E65 745d (M67TU) SAL
Release union nuts of pressure lines (1) on right with special
tool 13 0 140 .
Tightening torque 13 53 1AZ
.
Release bolts on bracket (rear side, intake air manifold).
Release union nuts of pressure lines (1) on left with special tool
13 0 140 .
Tightening torque 13 53 1AZ
.
Unlock plug (1) and remove.
Unfasten screws.
Unlock plug on pressure sensor and disconnect.
Remove pressure accumulator (2).
RA Removing and installing/replacing pressure accumulator of fuel injection system
BMW AG - TIS
12.02.2013 14:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
