7 Series E65 745d (M67TU) SAL
Release union nuts (1) of both pressure lines with special tool
13 0 140 .
Note:
Reset special tool in good time in order to avoid bending
pressure lines.
Tightening torque 13 53 1AZ
.
Disconnect pressure lines.
Only if replacing:
Unfasten screws.
Modify holder (1).
RA Replacing both pressure lines (between pressure accumulators on left and right)
BMW AG - TIS
12.02.2013 14:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -