7 Series E66 730Li (M54) SAL
Unscrew nut (1).
Remove grounding cable (2).
Release screws (3).
Remove cover (4).
Disconnect plug connections (5, 6, 7 and 8).
Remove holder (1) in direction of arrow.
Release fuses (1).
Release relays (2 and 3).
Installation:
Convert relays (2 and 3) to new wiring harness.
Disconnect plug connection (4).
Release cable tie (5).
Installation:
Replace cable tie (5).
Convert new engine wiring harness to holder (6).
Assemble engine.
Note:
Check function of DME.
RA Replacing wiring harness section for engine (M54)
BMW AG - TIS
04.02.2013 22:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
