7 Series E66 730Li (N52) SAL
32 41 311
Replacing suction line for power steering
(N52)
Important!
Adhere to the utmost cleanliness. Do not allow any dirt to
enter the hydraulic system.
Seal off hydraulic lines with plugs.
Necessary preliminary tasks:
•
Draw off and dispose of hydraulic fluid from fluid reservoir
•
Remove stabilizer from front axle carrier
Unfasten hose clip (1).
Detach suction line (2) from vane pump.
Installation:
Marking (P) must point to vane pump.
Align suction line (2) by way of marking (P) to connection on
vane pump.
Expose suction line up to connection on fluid reservoir.
Remove fluid reservoir from mounting bracket/body.
Disconnect return line from fluid reservoir.
RA Replacing suction line for power steering (N52)
BMW AG - TIS
07.02.2013 02:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
