X Series E53 X5 3.0d (M57) OFFRD
11 13 500
Removing and installing, sealing / replacing
oil sump (M57)
(engine removed)
Remove right engine support arm.
Remove exhaust manifold with turbocharger.
Secure engine with retaining plate, special tool 11 8 040, to
assembly stand, special tool 00 1 490
Note:
Special tool 11 3 350 can be used again after first being reworked.
Drain engine oil,
refer to 00 00 249.
Remove oil dipstick with guide tube (1).
Installation:
Slide new O-ring onto guide tube.
Coat new O-ring with engine oil.
Release all screws on oil sump (2).
Remove oil sump (2).
Note:
If the oil sump (2) is replaced, it is essential to convert the oil level
sensor (1) with a new gasket to the new oil sump.
RA Removing and installing, sealing / replacing oil sump (M57)
BMW AG - TIS
03.02.2013 18:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
