X Series E53 X5 3.0d (M57) OFFRD
Important!
Do not let propeller shaft fall into joints.
Joints and rubber sleeve can be damaged on constant-velocity
joint.
Grip propeller shaft and release nuts.
Bend propeller shaft downwards at center bearing (1).
Detach propeller shaft from transmission output flange and tie
back to side on vehicle underbody.
Installation:
Tightening torque 26 11 6AZ
.
Caution!
Front pipe must not rest on stabilizer.
Lower transmission.
RA Removing and installing transmission (GS5-39DZ, M57)
BMW AG - TIS
03.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -