X Series E53 X5 3.0d (M57) OFFRD
Preparing transmission mount, special tool 23 0 130 :
To do so, screw special tool 23 0 134 (3) onto special tools
23 0 131 (1) and 23 0 132 (2).
Note:
Pay attention to markings.
Support transmission and transfer box with special tool
00 2 030 and 23 0 130 .
Release screws and remove cross-member (1).
Tightening torque 27 00 10AZ
.
Release screws.
Tightening torque 26 11 1AZ .
Installation:
Replace self-locking nuts.
When tightening screws down: Grip each screw and tighten
down nut. This prevents the flexible disk from being subjected
to torsion stress.
RA Removing and installing transmission (GS5-39DZ, M57)
BMW AG - TIS
03.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
