X Series E53 X5 3.0d (M57) OFFRD
Important!
The section "Removing and installing reinforcement plate"
contains important installation instructions.
Remove reinforcement plate.
Remove engine underguard at front.
Remove engine underguard at rear.
Detach stabilizer bar and slide forwards. This operation is
described in the section "Removing and installing stabilizer bar".
Remove and install front propeller shaft.
Release screws.
Tightening torque 23 00 1AZ .
RA Removing and installing transmission (GS5-39DZ, M57)
BMW AG - TIS
03.02.2013 20:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
