bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing _ Replacing Front Differential (M57)|Page 1192 > < 3 RA Removing And Installing _ Replacing Front Differential (M57)|Page 1190
Page 4
background image

As shown in illustration: Support front axle carrier with special
tool  00 2 030  in conjunction with special tool  31 2 220  and a
block of wood.

Detach front axle carrier from engine carrier.

Lowering front axle:

Replace original screws in succession with screws of E38

front axle carrier (part number 9 900 223).

Screw in replaced screws (1) approx. 20 mm (axle lowers).

Installation:

Check threads for damage; if necessary, repair with Helicoil thread
inserts.

Front axle alignment is not required.

Tightening torque and installation instructions for front axle carrier.

Remove left engine mount.

Pull off vent hose.

RA  Removing and installing / replacing front differential (M57)

BMW AG - TIS

03.02.2013  21:56

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 4 -

3 RA Removing And Installing _ Replacing Front Differential (M57)|Page 1192 > < 3 RA Removing And Installing _ Replacing Front Differential (M57)|Page 1190