X Series E53 X5 3.0i (M54) OFFRD
As shown in illustration, support front axle support with special
tool 00 2 030 in conjunction with special tool 31 2 220 and a
block of wood.
Note:
Steering gear remains bolted to front axle support. Return hose of
steering gear must not be overstretched when front axle support is
lowered.
Detach front axle support from engine carrier and carefully lower
by approx. 90 to 100 mm.
Tightening torque and installation instructions for front axle
support.
Remove front axle differential.
Release screws on oil sump.
Move oil sump backwards.
Installation:
Sealing faces clean and free of seal debris.
In area of joints on end and timing case covers:
Apply Drei Bond 1209 sealing compound (refer to BMW Parts
Service) approx. 3 mm wide and 2 mm high.
RA Removing and installing/replacing oil sump (M54)
BMW AG - TIS
06.02.2013 16:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -