X Series E53 X5 3.0i (M54) OFFRD
32 31 090
Removing and installing steering column
Warning!
Observe safety instructions for handling vehicle battery.
After installation:
•
Carry out steering angle sensor adjustment
•
Perform function check:
I)
Check for ease of movement in overall adjustment range
of steering column to adjoining components/wires
II)
Turn steering wheel in both directions to full lock. The
airbag warning lamp must not light up in the process.
•
Check directional stability of vehicle
Necessary preliminary tasks:
•
Disconnect negative battery cable
•
Remove steering wheel
•
Remove top section of steering column casing.
•
Remove lower section of steering column trim
Unfasten screws.
Disconnect plug from gong and On-board Diagnosis.
Remove instrument panel trim.
RA Removing and installing steering column
BMW AG - TIS
06.02.2013 20:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
