X Series E53 X5 3.0i (M54) OFFRD
51 49 053
Removing and installing/replacing side trim
for rear lid upper section
Special tools required:
•
00 9 317
Open rear lid at top.
Using special tool 00 9 317 , lever out side trim (1) on left/right
with clip (2) from retainer (3) in lower trim (4).
Installation:
If necessary, replace faulty retainer (5).
With special tool 00 9 317 , unclip clips (1) in side trim (2).
Feed trim (2) out of swallow-tail guides (3) in upper trim (4) and
remove.
Installation:
If necessary, detach clips (1) from trim (3) and insert in rear lid.
Mounts (2) must not be damaged.
RA Removing and installing/replacing side trim for rear lid upper section
BMW AG - TIS
07.02.2013 00:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -