bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

6 RA Removing And Installing_replacing Insert For Trim On Rear Lid Lower Section > < 4 RA Removing And Installing_replacing All Trims For Rear Lid Upper Section
Page 1
background image

51 49 080

Removing and installing/replacing cover for
loading sill (on rear lid lower section)

Remove rear reflector (in rear lid lower section).

Release left/right screws (1).

Using a small screwdriver, lever out covers (2) by means of
chamfers (1) and release screw underneath.

Pull off cover (3) for loading sill.

Installation:

If necessary, replace faulty cover (1) for button on cover (2) for
loading sill.

RA  Removing and installing/replacing cover for loading sill (on rear lid lower sect

BMW AG - TIS

07.02.2013  00:41

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

6 RA Removing And Installing_replacing Insert For Trim On Rear Lid Lower Section > < 4 RA Removing And Installing_replacing All Trims For Rear Lid Upper Section