X Series E53 X5 4.4i (M62) OFFRD
Pull mounting plate downwards as far as water hoses permit.
Feed in special tool 11 2 450 between oil-water heat
exchanger (1) and engine carrier.
Installation:
Screw down special tool 11 2 450 with hub for vibration
damper.
Note:
Protect engine bracket from damage. Insert wood between
engine support and special tool 11 2 450.
Tighten down central bolt (1) to joining torque.
Tightening torque,
refer to Technical Data 11 23 2AZ.
Installation:
Place special tool 11 3 460 on special tool 11 2 450.
Note:
Special tool 11 3 460 is magnetic.
Installation:
Select 0
°
location and mark on insertion nut. Tighten the
central screw with torsion angle.
Tightening torque,
refer to Technical Data 11 23 2AZ.
RA Removing and installing/replacing hub for vibration damper (M62)
BMW AG - TIS
08.02.2013 01:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
