X Series E53 X5 4.8is (N62-S) OFFRD
Remove swivel bearing with drive shaft on right with two persons.
Weight is approx. 30 kg.
As shown in illustration, support front axle support with special
tool 00 2 030 in conjunction with special tool 31 2 220 and a
block of wood.
Note:
Steering gear remains bolted to front axle support. Return
hose of steering gear must not be overstretched when front
axle support is lowered.
Detach front axle support from engine carrier and carefully lower
by approx. 90 to 100 mm.
Release transmission screws (2).
Remove protective caps between transmission and oil sump.
Release oil sump screws (1).
Tightening torque: 11 13 2AZ
.
RA Removing and installing/replacing upper section of oil sump (M62)
BMW AG - TIS
12.02.2013 03:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -