X Series E70 X5 3.0Sd (M57T2) OFFRD
Removing valve block:
Disconnect plug connections (1) and expose wiring harness up to
valve block.
Release screw pins (1), open holder and suspend hydraulic lines
to one side.
Open holder (1) and remove control lines to rear axle oscillating
motor.
Important!
Hydraulic line and connection on valve block must be fitted
with suitable sealing plugs immediately after removal!
RA Removing and installing/replacing DYNAMIC DRIVE valve block
BMW AG - TIS
05.02.2013 10:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -