X Series E70 X5 3.0Si (N52K) OFFRD
Open weld joints in area (1).
Mark severance cut in accordance with measurement a and cut
support carrier.
Measurement a=50 mm before 20 mm dia. bore
Open weld joints in area (1).
Installation:
Weld in reinforcement plate at severance cut.
Open weld joints in area (1).
Drill out riveted joints in areas (1) and (2).
Open adhesive joints in areas (1) to (3).
Installation:
Adjust new part to fit with straightening attachment or universal
mount.
Use 19 rivets (size 815) in area (1).
Use 4 rivets (size 815) in area (2).
RA Replacing front left wheel arch
BMW AG - TIS
06.02.2013 21:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
