bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

5 RA Removing And Installing_replacing Rear (inside) Left Or Right Entrance Cover Str > < 4 RA Removing And Installing_replacing Front (inside) Left Or Right Entrance Cover St
Page 2
background image

Release entrance cover strip (1) at clips (2) and feed out.

Installation:

Lug (1) must not be damaged or missing; if necessary,
replace entrance cover strip (3).

If necessary, replace faulty clips (2).

Fit missing clips on entrance cover strip (3).

Fit entrance cover strip (3) with preinstalled clips (2).

RA  Removing and installing/replacing front (inside) left or right entrance cover st

BMW AG - TIS

06.02.2013  23:33

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

5 RA Removing And Installing_replacing Rear (inside) Left Or Right Entrance Cover Str > < 4 RA Removing And Installing_replacing Front (inside) Left Or Right Entrance Cover St