X Series E83 X3 2.0d (N47) OFFRD
Check crankshaft axial clearance.
Fit special tool 11 6 250 .
Axial clearance.
If the permitted axial clearance is exceeded:
-
Check crankshaft and guide bearing shells.
-
Replace work parts.
Remove end covers (1) with a suitable tool (2).
Installation:
Replace end cover with O-ring.
Turn crankshaft until special tool 11 8 750 engages in the right-
hand counterbalance shaft (1) (see arrow).
Note:
Figure shows crankshaft removed.
Turn crankshaft until special tool 11 8 750 engages in the right-
hand counterbalance shaft (1).
See arrow.
RA Replacing crankshaft (N47, N47S)
BMW AG - TIS
05.02.2013 21:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -